Nitrous Express Purge System for Lightning/Iceman Solenoids

Purging the air out of your nitrous line allows harder launches and quicker 60ft times, which in turn, can shave up to 2 tenths off of your quarter mile ETs. This NX Purge System includes a Lightning purge solenoid, push button, vent tube and a 1/8npt to 1/8npt fitting which allows you to connect the purge valve to the bypass/purge port of NX lightning and NX iceman solenoids.

The NX Purge System is designed to purge the air from your nitrous lines to allow immediate activation of your Nitrous system. This System includes a Lightning solenoid, push button for activation, and a vent tube to direct the purged nitrous out of the solenoid. Included is a 1/8th NPT to 1/8th NPT fitting. This allows you to connect and take advantage of the built in purge port of Lightning and Iceman solenoids. The Purge system can also be used to lower the bottle pressure for spot on nitrous performance every time you activate the system.

Purge System includes:

• Purge Solenoid
• Push button activation
• 1/8 to 1/8 NPT Fitting
• 1/8 NPT to Compression Fitting
• 7 inches of 3/16" Stainless Tubing.

If you use solenoids without a purge port, You will need:

PN 15600 If you run a -4 AN feedline.
PN 15601 If you run a -6 AN feedline.